Light Buckets Made for Ariel Atom

Does your Ariel Atom 2 or Atom 3 have the 2-light tail light or headlight stalks, but your original light buckets are missing or look rough? After an intensive process, we've hand designed replacements for this out-of-production part that are a big upgrade over the factory setup.

The Ariel Atom 2 and Atom 3, as well as the rear lights on the Atom 3.5, use stalks with 2 round low-profile domed lights, and normally come with a vacuum-formed surround or housing (called a light bucket) made from a thin sheet of ABS. These have a single hole in the middle and two humps for the back side of the lights, and are intended to bolt through the metal plate on the light stalk and protect the wiring on the "back" side of the light cluster. But, the thin original light covers eventually break down, or blow off during high speeds, and are known to crack and get lost on the track.

Our replacement is made from UV resistant ASA that is considerably thicker than the ABS parts and will likely outlast your Atom. Plus, they have been entirely redesigned to reduce flex and airflow inside that causes the stock parts to shred off - and they have a big upgrade for the mounting hardware. If you've ever replaced the lights on your Atom, you know how annoying it is to try to hold on to the small nut that secures the light bezel on without breaking the housing. Our design now has an integrated nut built inside of it, and can be installed and removed one handed - no more missing or frustrating nut to deal with!

Stainless installation hardware is included and the bezels are ready to go, and can be used front or rear without any modification - normally, the ABS sheet-style buckets had to be hand-trimmed to fit around the tube that makes up the light arm.

Fits all Ariel Atom 2, Ariel Atom 3, and Ariel Atom 3.5 vehicles made by Ariel UK, TMI, and Brammo. Please use the photos as a fitment guide and contact us for questions about your vehicle if needed.

Lights, mounting bracket, wiring, vehicle, and dirty garage floor not included. Includes only the dual-light housing/buckets and the required hardware to mount it. Fits only on front or rear dual-light housings as shown.